Starboard hull steps are complete, including the fancy inset for the boarding ladder.

I have neglected to update this blog for a few months. We have been working hard on the fitout inside, so…

In the main cabin, the space forward of the forward bulkhead is turned into a wardrobe; a hanging locker with lots…

We have bought the main motor, made a 3000 km journey to collect it, and test fitted it to the hull.…

Our cabin floors are 12mm ply sheeting supported on framing. The framing generally runs longitudinally, and in high use areas it…

I have roughed in a power cable onto the forward edge of the forebeam. The intention for this is to have…

The bridgedeck joins the two hulls. The web is the curved front of the bridgedeck, forward of the beds in the…

The fitout of the cabins is a structural component of the completed hull. Shelves are glued and coved onto the hull…

As we worked forward, fitting out along the starboard side from back to front, the deck stringers became an issue. Long…

The inside of the hulls had to be glassed over before the floor structure is fitted. These old photos show Birgit…

These are some older photos of the bathroom, showing the internal wall and high seat in the cockpit, as seen both…