The bridgedeck is the floor of the cabin that joins the 2 hulls. It is…

Now looking like a boat. Hulls have been leveled and straightened. We have been using a laser…

Yesterday, we had 21 visitors help us roll the two hulls. Thanks, everyone! The job…

I am still not sure about the outboard motors to use, but I am sure…

We didn’t start this hull till the end of November. There was a weekend of…

Completed the skinning of the port hull this morning. After fairing the chines, there is…

IMAG0234, a photo by SeeBeeZee on Flickr. More blood! Came out from under the hull,…

Working on the second hull is both exciting and boring at the same time. It…

We have changed the sheeting, again, on the bow of the port hull. The objective…

Here are some photos from last week, when we moved the first hull aside so…

Last weekend we moved the starboard hull off the building jig, and got started on…

With the first hull nearly ready to be turned over, the rudder must be fitted.…

We have now cut the frames for the second hull of our Peter Snell designed…

With the plywood cladding of the hull complete, we have commenced the fibreglass coating on…